|
 |
|
|
One of the simplest ways to dissolve gases, such as oxygen or carbon dioxide, in water is to introduce the gas as small bubbles - the smaller the bubbles the more efficient the absorption of the gas.The Point Four microbubble oxygen diffuser produces a cloud of extremely fine bubbles - 100 to 500 microns. This is much finer than graphite or carborundum diffusers porous hose and because the diffuser is flat, the bubbles do not coalesce as with circular section diffusers.The Point Four diffuser uses an ultra fine pore ceramic plate which ensures uniform bubbles across its entire surface. The ceramic is a clean and inert material.
Features and Benefits
- One of the most efficient diffusers on the market — uses less gas and requires fewer diffusers to achieve the same results
- Robust construction — the ceramic plate is set in a rigid enamel coated aluminum frame and will not break if frozen
- Easy to install and simple to operate — requires no power or complex attachment procedures
- Full customer assistance and technical support — we are oxygenation specialists and will assist you in sizing and configuring your system
- Warranty — 2 years covering defective materials and workmanship
Bubbling pressure: 25 to 35 psi. (1.7 to 2.4 bar)
Absorption efficiency: Largely depends on submerged depth (or operating pressure), typically 40% to 50% at 1m depth; can be as high as 80% or even 100% at depths of 6m or more (also depends on flow rate).
Model: MBD 100 --- MBD 75
Diffusing area: 12 1/8" x1 1/8"(31cm x 3cm) --- 6" x 1 1/8"(15cm x 3cm)
Overall size: 14 1/2" x1 3/4"(37cm x 4.5cm) --- 8 1/2" x1 3/4"(22cm x 4.5cm)
Weight: 1.2lbs(535g) --- 0.6lbs(310g)
Recommended operating range: up to 1.5 LPM(3.2 SCFH) --- up to 0.75 LPM(1.6 SCFH)
Maximum flow rate @ 50 psi (3.5 bar): 4.5 LPM(9.5 SCFH) --- 2.2 LPM(4.7 SCFH)
Gas inlet connection: 1/4" HoseBarb. --- 1/4" HoseBarb. |
|
|
|
|
|
|
|
|
|
|
 |
|
